When the German Army wanted a new semiauto service rifle in 1941, it received submissions from two companies; Walther and Mauser. Walther’s design didn’t strictly meet the criteria set forth, but it was clearly the better rifle and would eventually win the competition. This involved conducting tr...

While the Johnson LMG was issued in limited quantities throughout World War Two, notably to Marine Raiders, Paramarines, and the 1st Special Service Force, the US never issued web gear made for its uniquely-sized magazines. However, a small number of 12-magazine backpacks for the Johnson did find...

During the 1970s and 1980s, Colt wanted to sell not just standard M16 rifle and CAR-15 carbines to foreign military customers, but also wanted to supply support weapons. They put together the Model 621, aka M16A1 “HBAR” (Heavy Barreled Assault Rifle - not the same idea and the HBAR target rifles ...

One would think that the Shpagin PPSh-41 was as simple as a submachine gun could get, but that wasn’t the case in World War Two USSR. Barely had the PPSh gotten into real production than the Army was looking for something even simpler. An answer came from young designer Aleksey Sudaev with a comp...

In 1886, the Remington company fell into financial insolvency. It was reorganized as the Remington Arm Co under the leadership of Marcellus Hartley, and in 1890 the company made an attempt to compete once again with Colt. Remington introduced the Model 1890, which was essentially their tried-and-...

Police in inter-war Germany used a variety of submachine guns, and sometimes added a distinctive extra safety mechanism to them. No patent or documentation ha been uncovered (that I am aware of, anyway), but the exact same device is found on gun from the MP18,I through the MP40, including the MP3...

The Johnson LMG was adopted by the US Marine Corps for specialist units like Paramarines and Raiders, and saw use in some of the fiercest island campaign of the Pacific (in addition to use in Europe by the 1st Special Service Force and others). It was a light and hard-hitting weapon that was well...

In 1977, the US military adopted the FN MAG as the M240 in vehicular configuration to replace the less-than-successful M73/M219 machine guns. The USMC would get an early start adapting the 240 to ground configuration (the M240G), but it wasn’t until 1995 that the Army formally replaced the M60 wi...

A crash program to produce the PPD 34/38 after the initial battles of the Winter War, even as the improved PPD 40 was being rapidly developed. These are very rare gun today, and we have the chance to take the example out to the range and see how it handles...

Yesterday we looked at the history of the PPS-42 and how it was developed into the much more common PPS-43. Today we are taking it out to the range - the only time one of these very scarce gun has been filmed in recent history.

The US Army spent nearly 16 years languidly testing the Maxim gun, but was never willing to actually make a decision until a final trial in 1903 finally settled the matter. The Maxim was deemed the bet available machine gun and a contract was signed with Vickers, Sons, & Maxim to purchase 50 (lat...

The Soviet Union adopted its first submachine gun in 1935 after trials of some 14 different design in 1932/33. The winner of the trials was Vasily Degtyarev, once of the Soviet Union’s most prolific firearms designers. His model 1934 was a simple blowback gun reminiscent of the MP-28,II albeit wi...

Eugene Reising developed a .45 ACP submachine gun in the late 1930s that was basically the opposite of the Thompson - it was light and handy, fired from a closed bolt with a delayed blowback action, and was inexpensive to produce. Reising contracted with Harrington & Richardson to produce the gun...

“Pinto” is a name given to a specific sort of Smith & Wesson revolver by collectors. It refers to guns - typically J-, K-, and N-frame revolvers but all some semiauto pistols - produced with a mix of blued and nickeled parts. The name derives from the Pinto horse, which has patches of white and c...

Finland adopted the AK in 1962, as the m/62 - a milled receiver pattern. By the late 1960s the Valmet factory was experimenting with stamped receiver design to reduce costs. The first stamped Valmet rifle was the m/71, which used forward-mounted open sights like a regular AK instead of rear-mount...

The Auto Ordnance company made a couple different types of cases for the Thompson SMG, and today we are going to look at two of the most common and one exceptionally cool type. The two most typically found are the Police and FBI cases. Both of these hold the gun along with the detached stock, one...

Amos Rogers and Julius Spencer ran a company making mostly farm equipment in the 1840s and 1850s. In 1859, they took on a firearms manufacturing contract (as mechanical fabrication companies often do) to make Pettengill revolvers. The Pettengill was not a fantastic design, but it was good enough ...

Yesterday we took a look at the history and operation of the Wilkinson Arms Linda, and today I have it out at the BackUp Gun Match. Since I don't have iron sights on mine, I fitted with with a period-correct Weaver Qwik-Point fiber optic red dot sight.

Overall, the Linda performed much better...

The German military did not actually adopt the Mauser C96 "broom handle" before World War One. It was the first really successful semiauto pistol, but the German military chose the Luger instead, in 1908. However, as World War One continued, the German military realized it was going to be serious...

In the years after World War One, the British military wanted a new machine gun, and they wanted it to replace both the Lewis and the Vickers. Through the 1920s the British would tinker with most of the light machine guns that became available, but it was not until the early 1930s that a serious ...

The very early production MkI Bren light machine guns were made with two dovetail brackets on the left side of the receiver. The rear one was for the standard rear sight, and the front one was to accommodate two types of optical sights. A mounting for the No.32 telescopic sight (the same one used...

The British lost some 90% of their stock of Bren light machine guns in the disastrous Dunkirk evacuation, and in the following months rushed to rearm. Part of this program was a two-tiered simplification of the Bren design. First was a MkI Modified Bren (which was not marked any differently than ...

Just as World War One broke out in Europe, TC Johnson was working on a new Mauser-based sporting rifle design for the Winchester company. With the war, Johnson added options for military configurations (handguard, bayonet lug, etc) and presented the design (at this point called the Model A) to Wi...

In an effort to widen its potential marked for the C96 pistol, Mauser offered it in 9x25mm (aka 9mm Mauser Export) as well as the much more common 7.63x25mm cartridge. The 9mm cartridge was made by simply blowing out the bottlenecked 7.63mm case to a straight walled type and loading a 126gr bulle...