BSW Prototype Gas-Operated Pistol
Germany
•
7m 16s
In 1936 or 1937, the BSW company (Berlin-Suhler Waffenwerk) produced a small number of prototype pistols for German Army trials. These trials were eventually won by the Walther P38, and for good reason in this case. The pistol BSW submitted was a gas-accelerated blowback design, with an aluminum frame, stamped slide, 13-round magazine (in 9x19), and double-action-only shrouded-hammer firing mechanism.
I had the opportunity to try shooting one of the 3 surviving examples of this pistol thanks to the generosity of a reader named Steve (thanks, Steve!). This is one of those cases where it seems that the trials board evaluating guns made the right conclusion - this pistol was finicky to disassemble, quite large, and had harsher than normal recoil because of its light weight, high bore axis, and blowback mechanism. Its 13-round magazine was a nice touch, but one of very few positive elements in the gun.
Up Next in Germany
-
Walther MPL Submachine Gun
The Walther MP was an all-stamped submachine gun developed in the late 1950s, and available in long (MPL) and short (MPK) versions. It is an open-bolt, blowback design, but uses a somewhat innovative bolt in which most of the mass is located above and in front of the chamber, to reduce bolt trave...
-
Mauser's Gewehr 41(M) Semiauto Rifle
When the German military started looking for a self-loading rifle in the late 1930s, they had a pretty strict set of requirements. Most significantly, the rifles could not have gas ports or recoiling barrels, could not have moving parts on top of the action, and had to be capable of being operate...
-
1918 Mauser Tank Gewehr
Germany was the first country to produce a purpose-built antitank rifle, in response to the major Entente tank attack at Cambrai. The design was pretty simple, basically a scaled-up Mauser 98 with 4 locking lugs chambered for the massive 13.2mm TuF cartridge. It would perforate about 20mm of armo...
