Miller Pill-Lock Revolving Rifle
Percussion Long Guns
•
8m 31s
John and James Miller of Rochester New York designed and built this rifle, which is an example of an intermediate revolving firearm. It comes after the flintlock Collier guns, but before Sam Colt’s Paterson demonstrated how to use the hammer to automatically index the cylinder. Miller’s gun (it was actually patented by James Miller, in 1829) requires the cylinder to be manually rotated between shots, and uses a pill lock ignition system. Each chamber in the cylinder has a small recess into which a pill of explosive mercury fulminate can be seated and sealed in place with beeswax. The firing pin on the hammer crushes the pill upon firing, creating the sparks to ignite the gunpowder charge in the chamber.
Only a few hundred of these rifles were made, between 1835 and 1850. They were constructed by about a half dozen different gunsmiths, with the most common being Billinghurst (a man who had worked with the Miller brothers).
Up Next in Percussion Long Guns
-
America's First Metallic Cartridge: T...
The Burnside carbine was originally invented by Ambrose Burnside - the man who would later command the Army of the Potomac and after whom sideburns would be named. Burnside came up with the idea while stationed in Mexico as a young officer, and resigned his commission in 1853. A substantial amoun...
-
Lindsay's Two-Shot US Army Musket
John Parker Lindsay patented a superposed, 2-shot muzzleloading rifle action in 1860, and remarkably, was able to get a contract to sell them to the US Federal Army. The system was fairly simple, with two percussion caps and firehouse leading to a front and rear chamber. The rifle was loaded with...
-
A Mystifying 3-Barrel Percussion Shotgun
This is a three-barreled muzzleloading shotgun, with two pretty normal hammers on the top barrels and a rather unusual and simple under hammer for the bottom barrel. It has no markings at all, a hinged stock for some reason I cannot understand, and is clearly handmade. And that’s all I got.
